Drying a structure correctly isn't about running a few fans and hoping — it's a calculated process based on temperature, humidity, and airflow readings.
We calculate air mover and dehumidifier placement using psychrometric formulas, not a flat per-room equipment count.
We calculate drying requirements using temperature and humidity data, not a flat per-room rule.
Low Grain Refrigerant dehumidifiers pull significantly more moisture from the air than consumer-grade units.
Thermal scans on every Horace, ND job catch moisture a visual inspection alone would miss.
You receive documented daily readings showing the structure actually getting drier.
Below is the calculated, documented process our Horace, ND teams follow.
The assessment sets the baseline every later reading gets measured against.
Thermal imaging often reveals moisture has traveled further than the visible damage suggested.
We position air movers to create directed airflow across wet surfaces based on the assessment.
A technician returns daily to take moisture readings and log progress against the drying plan.
We adjust drying speed for sensitive materials like hardwood and cabinetry to prevent secondary damage.
The job closes only once moisture readings match the documented dry standard for each material type.
Tell our Horace, ND dispatcher about the current condition so we can prepare the right diagnostic equipment.
Our nearest Horace, ND crew brings diagnostic equipment loaded from the start.
You'll see the calculated plan and cost before drying equipment goes down.
The job closes only once documented readings confirm the structure is fully dry.
"The thermal imaging found moisture behind a wall that looked completely fine from the outside. Would have missed it otherwise." — Julian R.
"They came back every single day to take readings and showed me the numbers improving. Felt like real science, not guesswork." — Monique T.
"Our hardwood floor didn't warp because they slowed the drying process down specifically for it." — Grant P.
Visual appearance doesn't confirm dryness — instrument readings are needed to catch what's not visible.
Psychrometrics uses scientific formulas to size the drying plan to the actual moisture load.
Typical drying time is 3-5 days for standard materials, longer for sensitive ones like hardwood.
You'll see the actual numbers improve each day through documented logs.
Specialty drying protocols protect hardwood and cabinetry from the damage a standard drying speed could cause.
We reassess the plan, since stalled readings usually mean equipment placement or capacity needs adjusting, not just more time.
Horace is within our core structural drying response zone.
One call starts the psychrometric assessment process.
Call +1-844-833-1325